Common problems
-
JKL PVD coating basic process
(1) Pre-PVD treatment, including cleaning of items and pre-treatment. Specific cleaning methods include detergent cleaning, chemical solvent cleaning, ultrasonic cleaning, and ion bombardment cleaning. (2) Put them into furnace, including vacuum chamber cleaning and fixtures, and the installation...Read more -
Matters needing attention when welding stainless steel
1. The welding should be firm and reliable, and the solder on the outer surface of the parts should be filled in place, leaving no gaps. 2. The welding seam should be neat and uniform, and no defects such as cracks, undercuts, gaps, burn through, etc. are allowed. There should be no defects such ...Read more -
Stainless steel Cleaning Instruction
Clean Stainless Steel With Warm Water 01 Wipe Surfaces With a Microfiber Cloth Moistened With Warm Water Warm water and a cloth will be sufficient for most routine cleaning. This is the least risky option for stainless steel, and plain water really is your best cleaning option in most situations....Read more -
Specification of common stainless steel tubes for balustrade
38mm X 38mm for small balustrade ,51mm X 51mm or 63mm X 63mm for big balustrade ,thick is 1.5mm to 2.0mmRead more -
Difference Between SS304 and SS316 Materials
SS316 stainless steels are usually to be used for the railings installed near lakes or seas. SS304 are most common materials indoor or outdoor. As American AISI basic grades, the practical difference between 304 or 316 and 304L or 316L is the carbon content. The carbon ranges are 0.08% maximum ...Read more